Krush Kube 2.0 Grinder Review: Design, Use and Versions

The Krush Kube 2.0 is a compact, square, two-piece grinder made of anodized aluminum. It suits buyers who want a small grinder that sits still on a table, grips well and doubles as a loading tray. Buyers who want more room look at the 2.0 XL. Buyers who want a separate collection chamber look at the 3.0. This review covers all three, with the 2.0 as the main subject. The Kube 2.0 is available at Insomnia Smoke.

Insomnia Smoke
insomniasmoke.com
Find a Grinder That Fits Your Routine
Explore Insomnia Smoke’s selection of grinders and smoking accessories, with options for different sizes, designs and ways to use them.
Visit

Key Takeaways

  • Two-piece, square body in 6063 anodized aluminum, about 55 × 55 mm and roughly 35 mm tall.

  • Rounded corners and flat faces make it easy to grip, turn and set down.

  • One half works as a small loading tray. Ground herb collects in the dish half, with no separate chamber.

  • Dish capacity is 2.5 g. The 2.0 XL adds room. The 3.0 adds a taller body for a separate collection chamber.

  • Fewer parts means fast emptying and a short cleaning routine.

Table of Contents

What the Kube 2.0 is

Krush is a Canadian-founded grinder brand that supplies Europe. The Kube 2.0 is its square, everyday format. Krush lists the Kube 2.0 as a square grinder in 6063 anodized aluminum, measuring 55 × 55 × 35 mm and weighing 170 g. Its 2026 site gives a 55 mm × 55 mm footprint, a 2.5 g dish capacity, a weight of 175 g and a medium shred. The two pages differ by a few grams, so treat the weight as roughly 170 to 175 g.

Two terms, for readers new to grinders:

  • Two-piece grinder: a lid and a base. Each half carries teeth. There is no middle chamber and no kief screen.

  • Anodized aluminum: aluminum with a hardened oxide surface layer. It gives the body its color and a smooth, even finish.

Colors on the Krush site include Future Dusk, Emerald Green, Black, Grey and Rose Gold. Stock at Insomnia Smoke varies, so check the product page for the colors on offer.

Body, corners and grip

The cube is the main design decision. A round grinder rolls away and can slip in a wet or cold hand. The Kube has flat faces, so it stays where you put it. Krush describes the format as flat faces that sit still, with indexable corners.

In use, this shows up in three places.

  • Corners. They are rounded. Nothing digs into the palm when you press down or twist, even over a long session.

  • Faces. Your thumb and fingers land on flat surfaces. The grip feels the same in every orientation, so you do not have to look for the right way to hold it.

  • Turning. Each corner works as a stop for the fingers. The twist comes from the wrist and the grip, not from squeezing a smooth cylinder.

The body is solid metal. At about 170 g it feels weighty for its size, which helps it stay steady on a desk or tray while you turn the top.

Tooth design

The teeth do the actual work. Krush describes its tooth design as one that fluffs the herb as it grinds, producing a particle size intended to allow good airflow through a joint. In practice that means the teeth lift and tear the buds instead of pressing them into a dense mass.

The output is a medium shred. That is the right size for:

  • Rolling joints and cones

  • Filling a pipe, a one-hitter or a dugout

  • Loading many dry herb vaporizers

If you want a very fine powder, a medium shred is the wrong target. If you want texture that packs evenly and still lets air through, it fits. Krush says the 2.0 uses sharp teeth on both halves, so you grind by twisting the lid against the base.

One half as a loading tray

The feature that sets the Kube apart from many grinders is the tray function. The base half has a shallow dish. You can use it as a small loading tray in these ways:

  1. Break the herb into the dish.

  2. Close the lid and grind.

  3. Open the grinder and leave the base on the table as a tray.

  4. Tip or pick the shredded herb straight into a paper, bowl or vaporizer chamber.

Because the base has flat faces and a low profile, it stays still while you load. A rolling tray is optional for a quick session. For a vaporizer with a narrow chamber, you tip the dish toward the opening and the herb follows.

Loading, emptying and cleaning

A two-piece design changes the routine compared with a four-piece grinder.

Loading

You load the dish half directly. There is no hopper to fill and no chamber to align. Fill, close, twist. The 2.5 g dish capacity is enough for a joint or a bowl for one or two people. Larger quantities need more than one round.

Emptying

This is where the two-piece layout helps most. Open it and everything is in the base. Nothing falls through to a lower chamber, and nothing sticks in a screen. You tip it out, tap the edge and you are done.

Cleaning

With two parts there are fewer hidden corners. The areas to check are the teeth on both halves and the edge where the lid meets the base. A soft brush is enough for a routine clean. Residue sits in the dish and around the teeth, so that is where to look. For a deeper clean, the same principle as any metal grinder applies: loosen the residue, wipe and dry fully before closing. Insomnia Smoke covers the method in more detail in its grinder cleaning and maintenance guide.

Where ground material collects

Ground herb collects in the dish half. That is the base you also use as the tray. A small amount stays in the teeth on the lid. The base is wide and shallow, so you see the full result at a glance.

Size, portability and capacity

At about 55 × 55 mm and 35 mm tall, the Kube 2.0 is the lowest-profile Krush grinder. It fits in a jacket pocket, a small pouch or a storage case. The metal body does not flex, so it holds up in a bag next to keys.

Portability and capacity pull in opposite directions in any grinder. The Kube 2.0 puts portability first.

Point Kube 2.0
Footprint 55 × 55 mm
Height About 35 mm
Weight About 170 to 175 g
Dish capacity 2.5 g
Shred Medium
Parts Two

For a personal session, that capacity is enough. If you grind for several people or fill a vaporizer in one go, the XL is the better fit.

Kube 2.0, 2.0 XL and 3.0 compared

Krush positions the 2.0 as the original square, everyday format, against the higher-capacity 2.0 XL and the taller 3.0. Here is how the three fit different needs.

Kube 2.0 Kube 2.0 XL Kube 3.0
Best for Pocket carry, solo sessions Larger loads, more room A separate collection chamber
Build Two pieces Two pieces, larger body Taller body
Footprint 55 × 55 mm Larger than the 2.0 55 × 55 mm
Height About 34 to 35 mm Taller or wider than the 2.0 46 mm
Weight 170 to 175 g Heavier 185 g

The Krush comparison of the 2.0 and 3.0 lists the same footprint and dish for both, with the 3.0 12 mm taller and 10 g heavier. It advises the 2.0 for the lowest profile and the 3.0 for extra internal height.

Choose the 2.0 if

  • You carry the grinder every day.

  • You grind one session at a time.

  • You want the simplest cleaning routine.

Choose the 2.0 XL if

  • You want more room in the same two-piece format.

  • You fill a vaporizer or several papers in one go.

  • You are happy with a larger body in the pocket.

Choose the 3.0 if

  • You prefer a separate collection chamber to a single dish.

  • You do not mind a taller body.

  • You want extra height inside the grinder.

Other grinder types to consider

Some buyers want a different layout altogether. A four-piece grinder adds a screen and a kief catcher. Insomnia Smoke explains that format in its kief catcher grinder buying guide, including the anatomy of a four-piece grinder. The store also carries its own four-piece non-stick herb grinder and the Kannastör GR8TR V2 solid body grinder. For design-led picks, see the aesthetic grinder roundup.

Other grinder types to consider

The Kube sits in a different spot: compact, square, two pieces, built around grip and a tray. That is its case.

Perspective

We pick grinders by how they behave in use, not by feature count. The Kube 2.0 is a good example. It has two parts, a flat-faced body and a dish that doubles as a tray. Every part has a job.

Our catalog covers established American, Canadian and European brands, so we can place the Kube next to four-piece and solid body grinders and match each buyer to the format that suits them. For a daily carry grinder that is quick to empty and quick to clean, the Kube 2.0 is our pick. Buyers who want more room go to the XL. Buyers who want a separate chamber go to the 3.0.

The Kube also fits with the rest of what we sell: rolling products, dugouts and one-hitters, storage and odor control. A grinder works best as part of a small kit, and we stock that kit in one place.

Insomnia Smoke

Where to get it

The Krush Kube 2.0 is on the shop’s product page. The store ships discreetly, including to the EU and the UK, and sells to adults aged 18 and over. To build a full kit around the grinder, browse rolling products, dugouts and one-hitters, storage and smoke odor control, or see all herb grinders.

Krush Kube 2.0 Grinder Review: Design, Use and Versions

FAQ

What is the Krush Kube 2.0 made of?

Krush lists the body as 6063 anodized aluminum. The surface is smooth and even, and the square body has rounded corners. The grinder is a two-piece design with teeth on both halves.

How much does the Kube 2.0 hold?

Krush lists a 2.5 g dish capacity. That covers a joint or a bowl for one or two people. For larger loads, the 2.0 XL gives more room.

Does the Kube 2.0 have a kief catcher?

No. It is a two-piece grinder, and the ground herb collects in the dish half. If you want a separate collection chamber, the 3.0 is the Krush option. Four-piece grinders in the shop’s grinder collection add a screen and catcher.

How do you clean a Kube 2.0?

Open the two halves, brush the teeth and the dish, and wipe the edge where the lid meets the base. Let it dry fully before you close it. With only two parts, the routine is short.

Sources

 

Insomnia Smoke logo

Tillagd i varukorgen!

STAY UP TO DATE

Submit your email to get updates on products and special promotions.